Dave Simmo
Junior Member
Recovering from Surgery. Shoulders had to be rebuilt. End Stage joint damage
Posts: 76
|
Post by Dave Simmo on Aug 7, 2017 23:56:09 GMT
Ray & Ryan Dayle I getting back into the project. My End Goal is AC it may be a pipe dream but I never said I was smart. I will get released from bed rest next week. This is going to be updated as work on it. So as you look at this thread I Have been laid up for a year now. I intend to some how combine all of these Panels into my current 12 volt Off the Grid System.
Here is what I got sitting on the ground 24 235 Watts panels Watts (PTC): 215.7 Watts Max Power Voltage (Vmpp): 29.8 Volts Max Power Current (Impp): 7.9 Amps Open Circuit Voltage (Voc): 36.9 Volts Short Circuit Current (Isc): 8.46 Amps Max System Voltage: 600 Volts
I took My Income tax return and Bought these. I have a bench Stock of PWM controller. I know Mppt is better but I have alot these. I am shooting My Battery bay up to 10 Golf cart Batteries. I was blessed with about 400 feet of wire Its in a Big thick Wire casing Rubber. But there are four wire of six gauge copper wire in it. The ends are a mess damaged Mangled. But the rest looks good.
I am going to upgrade my Tripp-lite Inverter after a test to see if it screws a AC unit up.
I will post pic as I go at this. I have 4 telephone poles 1st Step is to Build a Panel rack/( I have to call it a carport ) Wife Issue. 30 ft long X 10 ft
I will post as I go.
Dave
|
|